產品詳情
單級混流泵A博野單級混流泵250HW-8
When the pump in the work due to cavitation impact or in the winter did not release the pump shell in the water and frozen is also prone to rupture, such as damage is heavier can not be repaired when the new pump shell should be replaced. Pump shafts are generally carbon steel parts, but due to manufacturing quality, use or installation and other reasons are also vulnerable to damage. Pump shaft may appear cracks, bending, shaft neck wear, thread damage, etc., may also appear fracture. If the damage is serious and cannot be repaired, the new shaft should be replaced. The impeller is an important working part of the pump and is made of cast iron. Due to manufacturing quality and use and other reasons are also vulnerable to damage. The impeller may appear cracks, due to cavitation effect on the surface of the bation of a nest eye or perforation, long-term flushing to make the leaves thin or partial grinding, and even crushed by debris. Some defects can be repaired; some defects cannot be repaired, that is, new impellers should be replaced. The bearing of the sliding bearing is cast of copper tin alloy, the wear resistance is very poor, is one of the most easy to wear and burn the wearing parts, the bearing can generally be repaired, can also be replaced with new parts. Rolling bearings generally have an average service life of 5,000 hours.
一.概述
1.用途：HW混流泵為臥式，單級，單吸，渦殼式混流泵。適用于輸送清水或物理，化學性質類似于水的其它液體。被輸送液體溫度不宜高于50度。廣泛用于農田灌溉，工業和城市排水等多種場合。HW泵的性能范圍：流量90-9000m3/h 揚程3.5-22m。
2. 特點：結構簡單，使用可靠，裝修方便，而且效率高，體型小，重量輕。jdhuiquan4.20
3. 傳動方式：用直接傳動和變速傳動。常用動力機是電動機和柴油機。訂貨 時應明確動力機的型號，以便確定聯軸器和皮帶輪的型號
4.型號說明：以150HW-8S例
150---------泵進出口直徑mm
8------------設計揚程 m
S------------變型代號
單級混流泵A博野單級混流泵250HW-8
通常泵的流量用體積計算，以Q表示，單位為米3/時（m3/h）、米3/秒（m3/s）、升/秒（1/s）。也可用重量計，以G表示，單位為噸/時（t/h）、噸/秒（t/s）、千克/秒（kg/s）。G與Q的關系：G=r×Qr-液體重度（千克/米3）因水的重量近似1000千克/米3，故1升/秒=3.6米3/時=3.6噸/時揚程（H）泵的揚程是指單位重量的液體通過泵所增加的能量。以H表示，實質上就是水泵能夠揚水的高度，又叫總揚程或全揚程。單位為米液柱高度，習慣上省去“液柱”，以米（m）表示。泵的總揚程由吸水揚程與出水揚程兩部分組成，因此總揚程=吸水揚程=出水揚程但由于水流經過管路時受到各種阻力而減少了泵的吸水揚程和出水揚程。
二.結構和作用
單級混流泵A博野單級混流泵250HW-8
（1）ZB型性能范圍流量2～200米3/時，揚程8～100米，配套功率0.25～45千瓦。（2）結構型式特點按泵的配力機類型分為電動機配套自吸泵和柴油機配套自吸泵。按實現自能的結構與工作特點可分為內滑式、外滑式、水環輪式和其他型式。傳動方式有直聯傳動（包括內軸）和皮帶傳動。進口直徑25～200毫米，共10個口徑，54個規格。管道輸水灌溉機組由動力機、農用泵、管路等組成的可移動輸水灌溉機組稱為輕小型管道輸水灌溉機組（簡成為灌溉機）。它是近年來灌溉方法上新興的一種灌溉機械，有G型輕小型管道輸水機組和CB型輕小型柴油機-泵直聯機組。（1）G型管道輸水灌溉機組動力：柴油機、電動機（2.2～11.03千瓦）；1.HW pump mainly has pump cover, impeller, pump body, pump shaft, bushing, and bearing body and other major components. The pump cover is connected with the pump body and the inlet pipe respectively. 2. There should be an appropriate gap between the pump cover plane and the impeller plane. The gap is too small will produce friction, the gap is too large, will lead to the pump body pressure water a large number of reflux, is the pump efficiency reduction. The suitable gap used in practice is 0.3-0.7mm, and the gap can be adjusted by adding and subtracting the thickness of the paper pad.
3. The shaft is applied to protect the pump shaft and should be replaced in time after wear.
1. Screw holes at the upper end of the pump body, used for filling water diversion or connecting vacuum pump pumping gas to divert water.
2. In order to expand the scope of application of the pump to meet the different needs of users, can cut the outer diameter of the impeller or exchange different perbance of the impeller.
Water pump, valve and accessories technology R & amp; d and Sales: motor, bearings, mechanical seals, bl Products Sales: Pump assembly and maintenance: self-and with all kinds of goods and technology import and export business (except for goods and technologies that the state limits the company to operate or prohibit imports and exports).
訂貨須知：用戶在訂貨（或簽訂技術協議）時，請注明：
1、 使用工況：流量、揚程、漿體濃度及比重、粒徑、吸入形式、傳動方式等；
2、 配套電視：型號、主要技術參數、防護等級、生產廠家等；
3、 其它配套項目：如泵的備件、專用工具、調速裝置等；
4、 其它特殊要求。
而引起壞損或不正常作業，本公司對產品供給終身修理效力。用戶在運用本公司產品。以便本公司及時予以處理改善和前進。本公司供給優質的售后效力，客戶所提問題必須在6小時內給予答復或處理。河北會泉泵業有限公司坐落安國市水泵工業園區，公司地處京，請及時反響本公司的進程傍邊所出現的問題或信息石角地帶，方位優勝，交通便當。SH雙吸泵，管道增壓泵，QJ型井用潛水深井泵，WQ/QW潛水排污泵，PW，YU，WG污水泵，NL，PN，PNL泥漿泵，AH，ZJ，HH，ZGP型系列渣漿泵，HW混流泵。型多級泵我公司首要運營：型清水泵AY型油泵等產品，以及各種水泵配件。出產，出售，效力為一體，引入，消化和吸收國外先進技術，開宣布優質系列產品。
